Liquid Chlorine

• Wet Surface

• Apply liquid chlorine

• Scrub surface with a hard bristle brush

• Rinse off surface

DO NOT let it dry on the surface.

If this does not work, please contact Marmiro Care® Team.

 Phone: 201-285-7015

 E-mail: info@marmirocare.com

It is not necessary or required to seal, however, two main reasons why sealing is mainly used is to enhance the stone in color or to protect. You may want to consider sealing if you will be entertaining a lot, cooking, or have a lot of trees around the area.

• Sanded/Un-sanded Grout: When using sanded grout, allow for 1/8″ grout joint or more. When using un-sanded grout, allow for 1/8″ grout joint or less.

• Polymeric Sand: Any size grout joint is acceptable. Tamping is recommended to consolidate all sand into the joints.

Your natural stone pavers straight from the crate will age over time, no matter the color, finish, or application. The aging process will depend on the finish and the natural elements. For example, you will notice more of a difference in your sandblasted product over time than you will your antiqued product, although they will both ultimately age. You will notice a difference within roughly six months to a year post-installation.

• Be sure to ask your sales rep for photos of the product you are considering freshly installed, as well as after a year or two to make an educated decision on which Marmiro Stones product works best for you.

Use a diamond tip core bit and water.

• Pro tip: Place a piece of plywood on top of your MSNSP and drill through that first and then into the product itself to prevent the stone from chipping upon impact. Using water during this process will also help for a clean cut.